This page covers cases that we support for keyguards to fit the
iPad Pro 11-inch (M4), sometimes called the 5th Generation.
If you have an iPad other than a Pro 11-inch (M4), you're on the wrong page.
For an iPad Pro 11 1st-4th Gen, look here.
For an iPad Air 11-inch (M2), look here.
For any other iPad, look here.
When you order a keyguard for an iPad Pro 11-inch (M4), specify the name and number of the case you find here.
You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.
If you have an iPad Pro 11-inch (M4) case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.
PRC-Saltillo VersaWrap iPad 7th-8th-9th Gen 10.2, Air 4/Air 5 10.9, 10th Gen 10.9, Air 11, Pro 11 #431
This is a funky case that stretches different ways to accommodate different iPad sizes, so it seems a little weird when you first put in the iPad. The screen opening ends up a different size for each different iPad size.
- Screen opening: 9-1/2" x 6-11/16", 241 mm x 169 mm
- Outside dimensions (with handle): 10-7/16" x 9-3/16" x 1", 265 mm x 233 mm x 25 mm
- Impact-resistant EVA material
- Folding stand
- Shoulder strap
- Optional speaker
- Pocket for adding an Apple AirTag
- Comes in a variety of colors
|
Best Attachment
|
Snap-in, suction cups, suction tape
|
|
Possible Attachment
|
Straps (last resort)
|
|
Not Suitable for
|
Lock-in, Velcro, magnets
|
|
SEYMAC/ArmorGuard Pro Rotating Hand Strap iPad Pro 11 (M4) #496
This case is sold under a variety of brand names. Do not confuse it for similar-looking cases like the case #490 below. On that one, the skin wraps all the way around the case. On this one, the skin wraps only partially over the back, leaving the hard shell exposed.
- Screen opening: 9-1/4" x 6-7/16", 235 mm x 163 mm
- Outside dimensions (without rotating handle): 10-3/4" x 8-7/16" x 13/16", 273 mm x 214 mm x 20 mm
- Soft silicone skin over polycarbonate shell
- Rotating kickstand with Velcro hand strap
- Shoulder strap
|
Best Attachment
|
Snap-in, lock-in
|
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, Velcro, magnets
|
|
SUPFIVES Rotating Hand Strap iPad Pro 11 (M4) #490
This case is sold under a variety of brand names. Do not confuse it for similar-looking cases like the case #496 above. On that one, the skin wraps only partially over the back, leaving the hard shell exposed. On this one, the skin wraps all the way around the case.
- Screen opening: 9-1/4" x 6-7/16", 235 mm x 163 mm
- Outside dimensions (without rotating handle): 10-13/16" x 8-7/16" x 11/16", 275 mm x 215 mm x 18 mm
- Soft silicone skin over polycarbonate shell
- Rotating kickstand with Velcro hand strap
- Shoulder strap
|
Best Attachment
|
Snap-in, lock-in
|
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, Velcro, magnets
|
|
SUPLIK/TOEVEK Robot Case iPad Air 4-5 10.9/Air 11 (6th Gen)/Pro 11 1st-4th Gen/Pro 11 (M4 5th Gen) #410
There are similar-looking cases that should not be confused for the Robot case. This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.
- Screen opening: 9-3/8" x 6-3/4", 238 mm x 171 mm
- Outside dimensions (including handles and kick stand): 13-3/4" x 10-1/16" x 1-1/8", 348 mm x 255 mm x 30 mm
- Headphone-wearing robot on back
- Robot's legs fold out to become a stand
- Comes with thin shoulder strap
|
Best Attachment
|
Snap-in for permanent mounting
|
|
Possible Attachment
|
Suction cups, suction tape, elastic straps (last resort)
|
|
Not Suitable for
|
Lock-in, Velcro, magnets
|
|
