This page covers cases that we support for keyguards to fit the
iPad Air 13-inch (M2).
If you have an iPad other than a Air 13-inch (M2), you're on the wrong page.
For an iPad Pro 13-inch (M4),
look here.
For any other iPad,
look here.
When you order a keyguard for an iPad Air 13-inch (M2), specify the name and number of the case you find here.
You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.
If you have an iPad Air 13-inch (M2) case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.
BRAECN Rotating Square Ring Stand iPad Pro 12.9 3rd-4th-5th-6th Gen/Air 13 (M2) #28B
This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant centered "X" on the back, the rotating and folding ring stand, and the delicate shoulder strap.
- Screen opening:10-7/16" x 7-7/8", 265 mm x 200 mm
- Outside dimensions (without rotating stand): 12-1/8" x 9-15/16" x 13/16", 307 mm x 252 mm x 21 mm
- Nice silicone skin over hard plastic shell
- Rotating ring stand/handle on back
- Thin fabric shoulder strap with thin metal or plastic clips, depending on the brand
|
Best Attachment
|
Snap-In or lock-in for permanent mounting, Velcro for quick change (weak and holds the keyguard high off the screen)
|
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, magnets
|
|
PRC-Saltillo VersaWrap iPad Pro 12.9 3rd-6th Gen, Air 13-inch (M2), Pro 13-inch (M4), #432
- Screen opening: 10-9/16" x 8-1/16", 269 mm x 205 mm
- Outside dimensions (with handle): 11-3/4" x 10-5/8" x 1-1/16", 299 mm x 270 mm x 27 mm
- Impact-resistant EVA material
- Folding stand
- Shoulder strap
- Optional speaker
- Pocket for adding an Apple AirTag
- Comes in a variety of colors
|
Best Attachment
|
Snap-in
|
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, lock-in, Velcro, magnets
|
|
ZtoTopCase Rotating Hand Strap/Stand iPad Air 13 (M2) #502
Easy to confuse with many similar-looking cases. Be sure to match both the pictures and the measurements.
- Screen opening:10-1/2" x 7-7/8", 267 mm x 201 mm
- Outside dimensions (without rotating stand): 12" x 10" x 5/8", 306 mm x 255 mm x 16 mm
- Nice elastic skin over polycarbonate shell
- Rotating Velcro hand strap/stand on back
- Shoulder strap
|
Best Attachment
|
Snap-In or lock-in |
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, Velcro, magnets
|
|
