How to Identify a Case for an iPad 12.9 1st/2nd Generation

Posted by Keyguard AT Design Team on 10th Mar 2019

This page covers cases that we support for keyguards to fit the 12.9" iPad Pro 12.9 and the iPad Pro 12.9 2nd Gen.

If you have an iPad other than a Pro 12.9 1st or 2nd Generation, you're on the wrong page.

For any other iPad, look here.

When you order a keyguard for an iPad Pro 12.9, specify the name and number of the case you find here.  You must use the red number to correctly identify a case!  Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.

If you have an iPad Pro 12.9 case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have.  We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard.  After that, we'll add it to our list so you can order keyguards to fit it in the future.

adaptive-tech-rugged-rubber.png

Adaptive Tech Solutions Rugged Rubber

The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.

To order a keyguard for the Rugged Rubber, choose the matching  Classic EVA case below.

alcas-376.jpg

AICase Heavy Duty for iPad Pro 12.9 1st/2nd Gen #376

  • Screen opening: 10-5/8" x 8", 270 mm x 202 mm
  • Outside dimensions: 12-5/8" x 9-3/16" x 11/16", 321 mm x 234 mm x 17 mm   
  • Silicone skin over hard plastic shell
  • Built-in off-centered folding stand makes it a little unstable
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
armorbox-kido-179.png

ArmorBox Kido

The ArmorBox Kido case is a variant of the classic EVA folding handle stand.

To order a keyguard for the ArmorBox Kido, choose the matching  Classic EVA case below.

avawo-kids-case.jpg

Avawo Kids Case

The Avawo Kids Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the Avawo Kids Case, choose the matching  Classic EVA case below.

ballistic-tough-jacket-56.png

Ballistic Tough Jacket iPad Pro 12.9 #56A

  • Screen opening: 11-5/8" x 8-7/16", 296 mm x 215 mm
  • Outside dimensions, not including detachable stand or corner bumpers: 12-1/4" x 8-15/16" x 9/16", 311 mm x 227 mm x 15 mm
  • Tough plastic shell with soft elastic insert to hold iPad and protect corners
  • Detachable stand clips around hard shell
  • Discontinued, but came in several colors
Best Attachment Snap-in or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape,Straps (last resort)
Not Suitable for Velcro, magnets 
big-grips-lift-52.jpg

Big Grips Lift iPad Pro 12.9 1st Gen/2nd Gen #52

  • Screen opening: 11-9/16" x 8-1/4", 294 mm x 210 mm
  • Outside dimensions (with handle): 14-1/16" x 11-15/16" x 1-5/8", 356 mm x 303 mm x 40 mm
  • Comes in several colors
  • Does not fit 3rd generation 12.9
Best Attachment Snap-in or lock-in for permanent mounting
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, Velcro, magnets
bolete-kids-shock-proof.png

Bolete Kids Shock Proof

The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.

To order a keyguard for the Bolete Kids Shock Proof, choose the matching  Classic EVA case below.

buddibox-eva-series.png

BuddiBox EVA Series

The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.

To order a keyguard for the BuddiBox EVA Series, choose the matching  Classic EVA case below.

cellular-360-308.jpg

Cellular 360 iPad Pro 12.9 1st Generation #308

  • Screen opening: 10-1/2" x 7-7/8", 266 mm x 200 mm
  • Outside dimensions (not including rotating handle): 12-9/16" x 9-3/16" x 5/8", 316 mm x 234 x 16 mm
  • Comes in several colors
  • Rotating handle with folding stand
  • Optional stylus and shoulder strap
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
armorbox-kido-59.jpg

Classic EVA iPad Pro 12.9 1st/2nd Generation #59A

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

  • Screen opening: 11-5/8" x 8-3/8", 295 mm x 212 mm
  • Outside dimensions (with handle): 12-1/16" x 13" x 15/16", 327 mm x 330 mm x 23 mm
  • Comes in several colors
  • Folding handle becomes stand
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
cooper-dynamo.jpg

Cooper Dynamo

The Cooper Dynamo is a variant of the classic EVA folding handle stand.

To order a keyguard for the Cooper Dynamo, choose the matching Classic EVA case above.

etopxizu-tablet-case.png

eTopxizu Tablet Case

The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.

fintie-kiddie.jpg

Fintie Kiddie (not Kiddie Light)

The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand.  Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.

To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.

griffin-survivor-all-terrain-39.png

Griffin Survivor All-Terrain iPad Pro 12.9 1st-2nd Gen #39A

  • Screen opening: 10-1/2" x 7-7/8", 267 mm x 200 mm
  • Outside dimensions: 12-3/4" x 9-7/16" x 3/4", 324 mm x 239 mm x 19 mm
  • Oval camera opening with two openings for ambient light sensors
  • Detachable folding stand clips to only one side of the case
  • Comes in black
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
griffin-survivor-slim-48.png

Griffin Survivor Slim iPad Pro 12.9 1st/2nd Gen #48

  • Screen opening: 10-7/16" x 7-13/16", 265 mm x 198 mm
  • Outside dimensions: 12-7/8" x 9-7/16" x 11/16", 327 mm x 240 mm x  18mm
  • Oval camera opening
  • Home key is exposed to the screen opening by a rounded V-shaped cutout
  • Sturdy attached folding stand
  • Available in different colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
gumdrop-droptech-51.jpg

Gumdrop DropTech iPad Pro 12.9 1st/2nd Gen #51A

  • Screen opening: 11-15/16" x 8-9/16", 303 mm x 218 mm
  • Outside dimensions: 12-5/16" x 9-1/16" x 5/8", 313 mm x 231 mm x 15 mm
  • Silicone skin bonded to ABS frame
  • Stylus holder on top/right, with cutout for smart keyboard on bottom/left
  • Available in a variety of colors
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in
gumdrop-hideaway-36.jpg

Gumdrop Hideaway iPad Pro 12.9 1st/2nd Gen #36A

  • Screen opening: 11-1/4" x 7-7/8", 285 mm x 200 mm
  • Outside dimensions: 12-7/16" x 9-11/16" x 7/8", 317 mm x 246 mm x 21 mm
  • Silicone skin over ABS shell 
  • Attached folding handle stand
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable f Velcro, magnets
hde-shock-proof.png

HDE Shock Proof

The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.

To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.

axtion-bold-29.jpg

Joy Factory aXtion Bold iPad Pro 12.9 1st-2nd Gen #29

This is a very expensive case that provides adequate protection against damage to the iPad.

  • Screen opening: 10-1/2" x 7-15/16", 267 mm x 201 mm
  • Outside dimensions (measured near the corners):  12-15/16" x 9-1/2" x 15/16", 328 mm x 242 mm x 23 mm  
  • 360° rotating handle with small, flimsy stand
  • Built-in screen protector
  • High-quality silicone skin is difficult to seat over thin, flimsy frame
  • Slotted corners for attaching shoulder strap (not included)
Best Attachment Snap-In or Lock-in for permanent mounting
Possible Attachment Straps (last resort)
Not Suitable for Velcro, magnets, suction cups, suction tape
kayscase-kidbox.png

Kay's Case KidBox

The Kay's Case KidBox is a variant of the classic EVA folding handle stand.

To order a keyguard for the Kay's Case KidBox, choose the matching Classic EVA case above.

lifeproof-nuud-49.png

LifeProof NÜÜD iPad Pro 12.9 #49

  • Screen opening: 11-3/8" x 8-5/16", 289 mm x 211 mm
  • Outside dimensions: 12-3/4" x 9-7/16" x 9/16", 325 mm x 240 mm x 15 mm 
  • Distinctive flattened-arch bulge around home key
  • Silicone skin over polycarbonate shell 
  • Available in black or white 
  • Claims to be waterproof 
  • Very expensive
Best Attachment Snap-In or Lock-in for permanent mounting (breaks the waterproof seal)
Possible Attachment Straps (last resort)
Not Suitable for Velcro, magnets, suction cups, suction tape (for some apps)
miesherk-483.jpg

Miesherk iPad Pro 12.9 1st/2nd Gen #483

  • Screen opening: 10-1/2" x 7-7/8", 266 mm x 200 mm
  • Outside dimensions (without rotating handle): 12-7/16" x 9-1/8" x 5/8", 317 mm x 232 mm x 18 mm
  • Rounded trapezoidal notch to expose home key
  • Rectangular camera opening
  • Two small round openings for ambient light sensors
  • Polyurethane skin over polycarbonate shell
  • Rotating hand strap/stand
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change (holds keyguard off the screen)
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets     
monoprice-kidz-cover.jpg

Monoprice Kidz Cover

The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.

To order a keyguard for the Monoprice Kidz Cover, choose the matching  Classic EVA case above.

new-trent-434.jpg

New Trent Gladius Rotating Handle iPad Pro 12.9 1st-2nd Generation #434

  • Screen opening: 10-5/8" x 7-13/16", 269 mm x 199 mm
  • Outside dimensions (not including rotating handle): 12-1/2" x 9-3/16" x 5/8", 317 mm x 234 x 16 mm
  • Rotating strap/handle with folding stand
  • Black only
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
nocase12.9-0.jpg

No Case For iPad Pro 12.9 Any Generation #0

When you order a keyguard for an iPad that is not in a case, choose "No Case" from the list of cases.

Best Attachment Velcro for quick change, suction cups, suction tape
Possible Attachment Straps (last resort)
Not Suitable for Magnets, snap-in or lock-in 
otterbox-35.jpg

Otterbox Defender iPad Pro 12.9 1st Gen #35

  • Screen opening:  10-1/2" x 7-15/16", 267 mm x 202 mm
  • Outside dimensions (not including removable stand): 12-1/2" x 9-3/16" x 5/8", 317 mm x 233 mm x 17 mm
  • Funky clip-on back piece removes to become a huge folding stand
  • Elastic skin over 2-part polycarbonate frame
  • Trapezoidal camera opening 
  • Home key is exposed to the screen opening by a rounded V-shaped cutout
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
otterbox-symmetry-28.png

Otterbox Symmetry iPad Pro 12.9 1st-2nd Gen #28A

  • Screen opening: 11-13/16" x 8-7/16", 300 mm x 215 mm
  • Outside dimensions: 12-3/8" x 9-1/16" x 11/16", 312 mm x 230 mm x 18 mm
  • Stiff elastic shell
  • Folio cover folds to back of iPad to become stand
Best Attachment Snap-in or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, elastic straps (last resort)
Not Suitable for Velcro, magnets     
pure-sense-buddy.png

Pure Sense Buddy

Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.

To order a keyguard for the Pure Sense Buddy, choose the matching  Classic EVA case above.

ultimate-ii.jpg

RJ Cooper Ultimate II

The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.

To order a keyguard for the Ultimate II, choose the matching  Classic EVA case above.

roocase-kidarmor.jpg

Roocase KidArmor

The Roocase KidArmor is a variant of the classic EVA folding handle stand. 

To order a keyguard for the Roocase KidArmor, choose the matching  Classic EVA case above.

stm-dux-32.jpg

STM Dux Plus iPad 12.9 1st/2nd Gen #32A

  • Screen opening: 11-7/8" x 8-1/2", 302 mm x 217 mm
  • Outside dimensions: 12-7/16" x 9-1/2" x 3/4", 317 mm x 241 mm x 18 mm
  • Fake leather magnetic "smart" folio cover
  • Folio cover doubles as folding stand
  • Holder for stylus or Apple Pencil
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in
tobii-dynavox-41.png

Tobii-Dynavox Speech Case Pro Keyguard Holder iPad Pro 12.9 1st/2nd Gen #41A

  • Screen opening: 10-9/16" x 8", 268 mm x 203 mm
  • Outside dimensions: 12-5/8" x 9-1/4" x 1-7/16", 321 mm x 234 mm x 40 mm
  • Polycarbonate keyguard holder fits over the Speech Case
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
travellor-kido.jpg

Travellor Kido

The Travellor Kido is a variant of the classic EVA folding handle stand. 

To order a keyguard for the Travellor Kido, choose the matching  Classic EVA case above.

unicorn-beetle-47.png

Unicorn Beetle Pro iPad Pro 12.9 1st/2nd Gen #47

  • Screen opening: 10-5/8" x 8", 270 mm x 203 mm
  • Outside dimensions: 12-7/16" x 9" x 11/16", 316 mm x 228 mm x 17 mm
  • Rounded trapezoidal notches in both ends to expose camera and home key
  • Two small round openings for ambient light sensors
  • Polyurethane skin over polycarbonate shell
  • Pro version comes with built-in screen protector
  • Attached folding stand
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
!