This page covers cases that we support for keyguards to fit the iPad Pro 11-inch (M4-M5), sometimes called the 5th Generation.
If you have an iPad other than a Pro 11-inch (M4-M5), you're on the wrong page.
For an iPad 10th Gen 10.9" / 11-inch (A16), look here.
For an iPad Pro 11 1st-4th Gen, look here.
For an iPad Air 11-inch (M2-M3), look here.
For any other iPad, look here.
When you order a keyguard for an iPad Pro 11-inch (M4-M5), specify the name and number of the case you find here. You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.
If you have an iPad Pro 11-inch (M4-M5) case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.
Bam Bino Space Suit iPad 10th Gen 10.9/ Air 11 (M2-M3)/ Pro 11 (M4) #159B
- Screen opening: 9-1/8" x 6-3/8", 231 mm x 163 mm
- Outside dimensions (with kickstands): 11-1/4" x 10" x 1-3/16", 286 mm x 252 mm x 31 mm
- Impact-resistant EVA material over hard plastic frame with built-in screen protector
- Folding stands in back corners
- Apple Pencil holder on back
- Comes in several colors
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
Big Grips Lift Pro 11 iPad 10th Gen 10.9"/11-inch (A16)/Air 11 (M2-3)/Pro 11 (M4-5) #528 #528
This stiff foam case stretches to fit many different iPad sizes. This model has a very long opening at the left end, and another long one at the top left for cameras and light sensors on all the different iPad sizes it supports.
- Screen opening: 9-3/8" x 6-3/8", 237 mm x 163 mm
- Outside dimensions (including handle): 11-11/16" x 9-15/16" x 1-1/2", 298 mm x 252 mm x 39 mm
- Comes in blue, black or green
| Best Attachment | Snap-In |
| Possible Attachment | |
| Not Suitable for | Suction cups or suction tape, lock-in, Velcro, magnets, elastic straps |
Casebus Classic Cute Case iPad Pro 11 (M4-M5) #445
Casebus's variation on the classic folding handle case. The is not the same as the Classic EVA case shown below.
- Screen opening: 9-5/16" x 6-5/8", 238 mm x 168 mm
- Outside dimensions (with handle): 10-5/8" x 10-15/16" x 7/8", 270 mm x 277 mm x 22 mm
- Folding handle becomes stand
- Apple pencil holder behind handle (reversible)
- Holes in handle for optional shoulder strap
- Comes in several colors
| Best Attachment | Snap-In |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Lock-in, suction cups, suction tape, Velcro, magnets |
Classic EVA iPad Air 11 (M2-M3)/Pro 11 (M4-M5) #493B
This case is sold under a huge variety of brand names, too many to list. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.
There are actually two different versions of this case floating around out there. This one we call the #493B. The other one is the #408B below. Measure the case opening to determine which one you have.
- Screen opening: 9-1/2" x 6-11/16", 240 mm x 170 mm
- Outside dimensions (with handle): 10-9/16" x 11" x 15/16", 269 mm x 279 mm x 23 mm
- Folding handle becomes stand
- Comes in several colors
| Best Attachment | Snap-in |
| Possible Attachment | Suction cups (partial blockage of some cells), suction tape, straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
Classic EVA iPad Pro 11 (M4-M5) #408B
This case is sold under a variety of different brand names, so we call them all collectively the "Classic EVA case". Camera and light sensor openings, pencil/stylus holders, etc. can vary from one vendor to another, but the basic case is the same.
There are actually two different versions of this case floating around out there. This one we call the #408B. The other one is the #493B above. Measure the case opening to determine which one you have..
- Screen opening: 9-3/8" x 6-9/16", 239 mm x 164 mm
- Outside dimensions: 10-13/16" x 11-1/4" x 15/16", 275 mm x 284 mm x 24 mm
- High-impact EVA material with folding handle/stand
- Folding stands in back corners
- Some variants have an Apple Pencil holder in the folding handle
- Comes in several colors
| Best Attachment | Snap-in or lock-in for permanent mounting |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
Joy Factory aXtion Bold MP iPad Pro 11 #509
This is a very expensive case that offers good protection. It is extremely easy for kids to take apart, and extremely difficult for adults to put back together.
- Screen opening: 9-5/16" x 6-7/16", 236 mm x 163 mm
- Outside dimensions (with stand, but without strap): 10-11/16" x 8-3/16" x 7/8", 272 mm x 208 mm x 22 mm
- Rotating folding stand on back with elastic hand strap
- Pencil holder on top edge
| Best Attachment | Snap-in, lock-in |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Velcro, magnets |
PRC-Saltillo VersaWrap iPad 7th-8th-9th Gen 10.2, Air 4/Air 5 10.9, 10th Gen 10.9, Air 11, Pro 11 #431
This is a funky case that stretches different ways to accommodate different iPad sizes, so it seems a little weird when you first put in the iPad. The screen opening ends up a different size for each different iPad size.
- Screen opening: 9-1/2" x 6-11/16", 241 mm x 169 mm
- Outside dimensions (with handle): 10-7/16" x 9-3/16" x 1", 265 mm x 233 mm x 25 mm
- Impact-resistant EVA material
- Folding stand
- Shoulder strap
- Optional speaker
- Pocket for adding an Apple AirTag
- Comes in a variety of colors
| Best Attachment | Snap-in, suction cups, suction tape |
| Possible Attachment | Straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
SEYMAC/ArmorGuard Pro Rotating Hand Strap iPad Pro 11 (M4) #496
This case is sold under a variety of brand names. Do not confuse it for similar-looking cases like the case #490 below. On that one, the skin wraps all the way around the case. On this one, the skin wraps only partially over the back, leaving the hard shell exposed.
- Screen opening: 9-1/4" x 6-7/16", 235 mm x 163 mm
- Outside dimensions (without rotating handle): 10-3/4" x 8-7/16" x 13/16", 273 mm x 214 mm x 20 mm
- Soft silicone skin over polycarbonate shell
- Rotating kickstand with Velcro hand strap
- Shoulder strap
Best Attachment Snap-in, lock-in Possible Attachment Elastic straps (last resort) Not Suitable for Suction cups, suction tape, Velcro, magnets
SUPFIVES Rotating Hand Strap iPad Pro 11 (M4) #490
This case is sold under a variety of brand names. Do not confuse it for similar-looking cases like the case #496 above. On that one, the skin wraps only partially over the back, leaving the hard shell exposed. On this one, the skin wraps all the way around the case.
- Screen opening: 9-1/4" x 6-7/16", 235 mm x 163 mm
- Outside dimensions (without rotating handle): 10-13/16" x 8-7/16" x 11/16", 275 mm x 215 mm x 18 mm
- Soft silicone skin over polycarbonate shell
- Rotating kickstand with Velcro hand strap
- Shoulder strap
| Best Attachment | Snap-in, lock-in |
| Possible Attachment | Elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, Velcro, magnets |
SUPLIK/TOEVEK Robot Case iPad Air 4-5 10.9/Air 11 (6th Gen)/Pro 11 1st-4th Gen/Pro 11 (M4 5th Gen) #410
There are similar-looking cases that should not be confused for the Robot case. This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.
- Screen opening: 9-3/8" x 6-3/4", 238 mm x 171 mm
- Outside dimensions (including handles and kick stand): 13-3/4" x 10-1/16" x 1-1/8", 348 mm x 255 mm x 30 mm
- Headphone-wearing robot on back
- Robot's legs fold out to become a stand
- Comes with thin shoulder strap
| Best Attachment | Snap-in for permanent mounting |
| Possible Attachment | Suction cups, suction tape, elastic straps (last resort) |
| Not Suitable for | Lock-in, Velcro, magnets |
Unicorn Beetle Pro iPad Pro 11 (M4-M5) #61B
- Screen opening: 9-3/16"" x 6-3/8", 234 mm x 162 mm
- Outside dimensions: 10-1/4" x 7-7/8" x 9/16", 260 mm x 201 mm x 15 mm
- Stiff silicone skin over 2-piece polycarbonate clamshell
- Kickstand on back
- Pencil holder on front
- Comes in several colors
| Best Attachment | Snap-in, lock-in |
| Possible Attachment | Velcro (weak), elastic straps (last resort) |
| Not Suitable for | Suction cups, suction tape, magnets |