This page covers cases that we support for keyguards to fit the
iPad Pro 13-inch (M4).
If you have an iPad other than a Pro 13-inch (M4), you're on the wrong page.
For an iPad Air 13-inch (M2), look here.
For any other iPad, look here.
When you order a keyguard for an iPad Pro 13-inch (M4), specify the name and number of the case you find here.
You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.
If you have an iPad Pro 13-inch (M4) case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.
ArmorGuard/SEYMAC Rotating Handle Stand iPad Pro 13 (M4) #55
This case is sold on Amazon under several different brand names. When ordering a keyguard, you'll find it on our list of cases as the "SEYMAC Rotating Hand Strap #55".
- Screen opening: 10-1/2" x 7-7/8", 267 mm x 201 mm
- Outside dimensions (without rotating handle/stand): 12" x 9-1/16" x 7/8", 304 mm x 252 mm x 23 mm
- Rotating hand strap/stand
- Some versions come with a shoulder strap
- Pencil garage on front
|
Best Attachment
|
Snap-in or lock-in for permanent mounting
|
|
Possible Attachment
|
Velcro (barely adequate and holds keyguard high off the screen), elastic straps (last resort)
|
|
Not Suitable for
|
Magnets, suction cups, suction tape
|
|
ARMOR-X MXS iPad Pro 13 (M4) #446
- Screen opening: 10-1/2" x 7-7/8", 265 mm x 200 mm
- Outside dimensions (without kickstand): 11-1/2" x 8-15/16" x 9/16", 294 mm x 226 mm x 15 mm
- Stiff elastic skin over hard plastic shell
- Built-in screen protector
- Claims to be waterproof
- Kickstand on back can be replaced by "X-Mount" adapter for attaching to a wheelchair mount, desktop mount, etc.
- Funky shoulder strap attaches to kickstand
|
Best Attachment
|
Snap-in, lock-in
|
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, Velcro, magnets
|
|
Classic EVA iPad Pro 13 (M4) #302B
This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.
- Screen opening: 10-9/16" x 8", 269 mm x 203 mm
- Outside dimensions (with handle): 12" x 12-1/2" x 7/8", 306 mm x 317 mm x 23 mm
- Comes in several colors
- Folding handle becomes stand
|
Best Attachment
|
Snap-In
|
|
Possible Attachment
|
Suction cups, suction tape, straps (last resort)
|
|
Not Suitable for
|
Lock-in, Velcro, magnets
|
|
Cooper Dynamo
The Cooper Dynamo is a variant of the classic EVA folding handle stand. Don't confuse it with the Cooper DynamoRE described below, which comes with a removable screen protector frame.
To order a keyguard for the classic Cooper Dynamo, choose the matching
Classic EVA case above.
|
Herize/SEYMAC Rotating Handle Stand iPad Pro 13 (M4) #55
This case is sold on Amazon under several different brand names. When ordering a keyguard, you'll find it on our list of cases as the "SEYMAC Rotating Hand Strap #55".
|
Best Attachment
|
Snap-in or lock-in for permanent mounting
|
|
Possible Attachment
|
Velcro (barely adequate and holds keyguard high off the screen), elastic straps (last resort)
|
|
Not Suitable for
|
Magnets, suction cups, suction tape
|
|
Joy Factory aXtion Bold MP iPad Pro 13 (M4) #30B
- Screen opening: 10-9/16" x 7-15/16", 268 mm x 201 mm
- Outside dimensions (without rotating handle/stand): 12" x 9-11/16" x 15/16", 304 mm x 246 mm x 23 mm
- Stiff elastic skin over thin plastic shell
- Rotating elastic buckle/hand strap with rotating ring stand on back
- Built-in screen protector
- Apple pencil holder on top edge
|
Best Attachment
|
Snap-in, lock-in
|
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, Velcro, magnets
|
|
Miesherk Rotating Hand Strap Stiff Skin iPad Pro 13 (M4) #32B
- Screen opening: 10-1/2" x 7-7/8", 267 mm x 201 mm
- Outside dimensions (without kickstand): 11-9/16" x 9-7/16" x 5/8", 294 mm x 240 mm x 16 mm
- Stiff elastic skin over hard plastic shell
- Rotating Velcro hand strap on back
- Built-in screen protector
- Shoulder strap
|
Best Attachment
|
Snap-in, lock-in
|
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, Velcro, magnets
|
|
Otterbox Defender iPad Pro 13 (M4) #36B
- Screen opening: 10-3/4" x 8-3/16", 274 mm x 208 mm
- Outside dimensions (without clip-on back/stand): 11-1/2" x 8-15/16" x 1/2", 293 mm x 227 mm x 14 mm
- Stiff elastic skin over 2-piece snap-together plastic shell
- Built-in screen protector
- Apple pencil holder on top edge
- Detachable back with corner bumpers and folding stand
|
Best Attachment
|
Snap-in, lock-in
|
|
Possible Attachment
|
Velcro (attaches directly to screen protector, not good for grids with many small cells), elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, magnets
|
|
PRC-Saltillo VersaWrap iPad Pro 12.9 3rd-6th Gen, Air 13-inch (M2), Pro 13-inch (M4), #432
- Screen opening: 10-9/16" x 8-1/16", 269 mm x 205 mm
- Outside dimensions (with handle): 11-3/4" x 10-5/8" x 1-1/16", 299 mm x 270 mm x 27 mm
- Impact-resistant EVA material
- Folding stand
- Shoulder strap
- Optional speaker
- Pocket for adding an Apple AirTag
- Comes in a variety of colors
|
Best Attachment
|
Snap-in
|
|
Possible Attachment
|
Elastic straps (last resort)
|
|
Not Suitable for
|
Suction cups, suction tape, lock-in, Velcro, magnets
|
|
SEYMAC Rotating Handle Stand iPad Pro 13 (M4) #55
This case is sold on Amazon under several different brand names, including ArmorGuard Pro, Herize, and TimeCity. When ordering a keyguard, you'll find it on our list of cases as the "SEYMAC Rotating Hand Strap #55".
- Screen opening: 10-1/2" x 7-7/8", 267 mm x 201 mm
- Outside dimensions (without rotating handle/stand): 12" x 9-1/16" x 7/8", 304 mm x 252 mm x 23 mm
- Rotating hand strap/stand
- Some versions come with a shoulder strap
- Pencil garage on front
|
Best Attachment
|
Snap-in or lock-in for permanent mounting
|
|
Possible Attachment
|
Velcro (barely adequate and holds keyguard high off the screen), elastic straps (last resort)
|
|
Not Suitable for
|
Magnets, suction cups, suction tape
|
|
TimeCity/SEYMAC Rotating Handle Stand iPad Pro 13 (M4) #55
This case is sold on Amazon under several different brand names. When ordering a keyguard, you'll find it on our list of cases as the "SEYMAC Rotating Hand Strap #55".
|
