How to Identify a Case for an iPad Air 11

How to Identify a Case for an iPad Air 11

This page covers cases that we support for keyguards to fit the 11" iPad Air 11.  Some people call this the iPad Air 6th Generation.

If you have an iPad other than an Air 11, you're on the wrong page.

For an iPad Air 4/Air 5 10.9", look here.

For an iPad Pro 11 1st - 4th Gen., look here.

For the 11" iPad Pro 11 (M4), look here.

For any other iPad, look here.

When you order a keyguard for an iPad Air 11, specify the name and number of the case you find here.  You must use the red number to correctly identify a case!  Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.

If you have an iPad Air 11 case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have.  We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard.  After that, we'll add it to our list so you can order keyguards to fit it in the future.

ccmao-155.jpg.jpg

Azzsy/CCMAO KickStand iPad Air 4-5 10.9"/Air 11 #155

This case is sold under a variety of brand names.

  • Screen opening: 9-1/8" x 6-9/16", 231 mm x 167 mm
  • Outside dimensions (with handle): 10-5/16" x 8-1/16" x 11/16", 262 mm x 205 mm x 17 mm
  • Soft silicone skin over 2-piece polycarbonate clamshell
  • Off-center kickstand
  • Pencil holder on front
  • Comes in several colors 
Best Attachment Snap-in, lock-in
Possible Attachment Suction cups, suction tape, elastic straps (last resort)
Not Suitable for Velcro, magnets
toevek-410.jpg

SUPLIK/TOEVEK Robot Case iPad Air 4-Air 5 10.9/Air 11/Pro 11 #410

There are similar-looking cases that should not be confused for the Robot case.  This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles. 

  • Screen opening: 9-3/8" x 6-3/4", 238 mm x 171 mm
  • Outside dimensions (including handles and kick stand):  13-3/4" x 10-1/16" x 1-1/8", 348 mm x 255 mm x 30 mm
  • Headphone-wearing robot on back
  • Robot's legs fold out to become a stand
  • Comes with thin shoulder strap
Best Attachment Snap-in for permanent mounting 
Possible Attachment Suction cups, suction tape, elastic straps (last resort)
Not Suitable for Lock-in, Velcro, magnets